中文
英文
-
What should be paid attention to when using a five axis rotating dispensing machine
2026-08-25Five axis (X/Y/Z+A/B rotation axis), capable of 3D dispensing on inclined surfaces, curved surfaces, and circular surfaces; Compared to ordinary three-axis systems, there are unique risks such as interference with the rotating axis, angle calibration, rotating glue throwing, and cable twisting. These risks are divided into seven parts: pre startup, programming and debugging, production operation,
-
What are the main tasks of the vacuum sealing unit
2026-08-18Commonly used as two-component potting adhesive for epoxy, polyurethane, and silicone, serving transformers, capacitors, motors, and other applications IGBT、 The core goal of products such as car power supplies and sensors is to eliminate bubbles, completely fill gaps, and ensure insulation/thermal sealing.
-
What are the advantages of the single tube precision screw valve glue supply series
2026-08-10The single tube precision screw valve belongs to the volumetric single component glue supply valve body, which relies on servo driven screw stator engagement to form a closed cavity for conveying glue. Compared with time pressure dispensing valves and plunger valves, it has outstanding advantages in quantitative stability, fluid compatibility, process adaptation, installation and maintenance.
-
What should be noted during the daily maintenance of the sealing vacuum defoaming curing assembly li
2026-08-03The entire production line is divided into six modules: glue supply metering system, vacuum defoaming chamber, conveying and transmission mechanism, heating and curing tunnel, vacuum pump system, and electrical control system. At the same time, it distinguishes between "daily inspection per shift" and "periodic maintenance", with risk warnings attached.
Welcome to Suzhou Kaihui Intelligent Equipment Co., Ltd
WeChat official account
Scan your phone once
Wechat ID：WANGYUNHUA
wechat
contact
phone